Qdeathstar

Indy. I looked up Sjogrens. I got a lot of the systems... dry mouth, dry eyes, trouble swallowing, but i don't have the dry vagina, How do you diagnose it? Do i go to the doctor and say i think i have sjogrens or what? thanks.

Yup

They are waiting to release it until after game of thrones... so 2018.

Yep.

Survey says: filler

A lot of set up, plus you sort of knew where it was going... still liked it.

Here is an update This is the mount for the idler pulleys. I was using printed abs but after a month of tension in the belt the abs want really holding up, plus, i had to use long screws because the abs was thick... A view from underneath, showing some pocketed fasteners. This is the base of the motor mounts. The slots are to allow sideways adjustment of the motor, so that i can keep the belts parallel and at 90 degrees. I will cut slots in the aluminum tubing to tension the belts. Just another view from the underside... I really enjoy milling, got a lot to learn but there is something satisfying about shaping metal into something, Got a few pictures of the mill set up with dro as well. A lot of chips.. I think ebay. is the best bed to get tooling, I got some nice end mills that are much higher quality than the grizzly set i bought for about half the price.... i want to get a corner-radius end mill set and maybe a face cutting end mill asap, but maybe after i get my small lathe.

tramp stamp. its pretty obvious.

i forgot they let you play turn based over time, Me and jizzin currently jacking it

my user name is Qdeathstar ill check back in like ten minutes to see if anyone wants to play with me, otherwise i'll be on tomorrow at around 9:30 est

Are there still places to play?

i don't know... im glad you got the mri though... i have ave been feeling with severe neck aches that reoccur ever week or so as well as persistent dry eye and the doctors don't do anything. I think you have to visit a few times so they can get there money, but i don't have time to do that... a doctors visit is like three hours of my day...

I had a small delay. I decided to get a milling machine. It will increase the skookemness of my 3d printer as it will make all the parts more precise.... i finally got it unpacked and unloaded Finally got the mill home and in place. I still have a lot of set up to do. I need to extend an existing 20amp 240v circuit so I can power the thing... and need to install the digital read out. The mill and stand weighs around 1000lbs ;).

what is there to loose. Plus, in a post apocalyptic world, i'd bet australia would fair best.

she should have lost one. I don't really feel like the lannisters aremthe "bad guys" any more, especially after last season...

Honesty Attrition: Of words bounced off me and on to you. We aren't aren't saying playing until we do. after. We've crafted careful outs - snarky innocents. We are always right- I've asked her and she asked you. We all agree we are clever. Your words bounce off me and into your skull like a bullet. Pull the trigger. But it's not about you.

You can watch older episodes commercial free using the A&E app on FireTV.. resolution isn't that great though..

i think they've gotten better at that.

It comes on friday and saturday 9:00-12:00... anyone watch?

bu bam dum bum pa da dum da du dum pah..

i know that some series are drawn out.. i was asking for examples where the writers/creators wanted to end the series and the studio said no....

Which shows did you have in mind, that the network forced the writers to keep writing... or got replacement writers? breaking bad? Sons of anarchy? Dexter? Was it Lost? Mmmmm In general, writers get paid to write... they aren't the ones who decide to end a series for that reason... not because the network wants to keep paying them to write hackneyed material..

What choice did hbo have?

Another round of updates. I have figured out the z axis belt tensioning. As you can see the bottom belt enters a printed block and then exits back out the bottom. I used another piece of belt along size to make sure it doesn't slip out. On the top, i have a screw and captive nut that pushes down on a block to pull the belt tight. I designed the part with some grooves so that it can't pop out. I didn't really have enough room for a belt along side the main belt where it exits (its there but only three teeth) so i zip-tied the belt together up top to stop it from slipping. It did not slip before i zip-tied it however. Over at it works These are the things the belt pushes against. I put a bolt on the top where the other bolt pushes into this piece so that the plastic doesn't get worn or give as much. The little slot was for an alternate idea that didn't go anywhere :D. I was going to slide in a small washer and have the main screw hit that and feed through the plastic piece. This way is simpler and works. Due to several factors i will need to redesign the hot end mount, as well as the x-rail. I am not happy with it ATM because it costs me too much y-space (3" almost) and i also need to be able to move it down about three inches. I think i will get another wider rail for the x axis and mount it in a more similar way to The Digital Dentists original design. In the end i may not go with the nimble because it creates about the same amount of problems as it solves. I bought it when i was committed to sticking with my Delta... was hoping i could repurpose it for the corexy but the drive cable will make an enclosure harder to design. Figuring out the z-axis was so far the hardest part of the printer. I eventually settled on this set up. I had an extra 8mm rod, so cut it to length and mounted it to the top of the printer as you see. The pulley slides on the rod without a bearing. Its not the best, but i think for my purpose it will be OK. If not they do have some 5mm id 8mm od bearings. I can then get some 5mm rod and mount it in a similar way, with the bearing in-between the rod and pulley. Im up for other ideas as well. I got the bed mount ready. The three black screws will be 50mm flat head screws that will be fed through the mic6 bed, with a spring, to allow me to level the bed. The aluminum blocks are tapped and there is a 6mm hole drilled through the extrusions to allow the screw to pass cleanly through without interference. I may need to beef this up, apparently the plate weighs 10 lbs! Coming along.

In cannuckistan it doesn't get above 80 degrees though, right?